No tutorials

Dear people,

As you can see on my page, the tutorials are not shown, because I temporarily disabled them. I did this action, because I accidentally removed most images of the tutorials in Google Photos.
So unfortunately I have to put all images back and it's going to take a while to do that.

Thanks for all who are stopping by my page frequently. I hope I can make the tutorials operate as soon as possible.

God bless!

Ona K.

Translate this page into:

Welcome!






Old Psp Tuts

Welcome to Old PSP Tutorials! My website is viewable with all web browsers.

http://farm9.staticflickr.com/8070/8166709782_209946f327_o.png

** Tutorials can be translated with Google® Translate **
https://cdn0.iconfinder.com/data/icons/yooicons_set01_socialbookmarks/256/social_google_box.png

Don't hesitate to be a member of this page!

Click on an image for a larger view.

**Always scroll down to read the actual post**





©2013-2017 Old PSP Tutorials. Images with my watermark are copyrighted by me, so I reserve all rights. It is not allowed to edit or to modify the pictures in any way. It is not allowed to use the images/backgrounds from the layout and from the welcome box. Please respect my work.

Tuesday, January 07, 2014

Psp tutorial: Baby Scrap


Original tutorial was written by Jet in Dutch. Her website could be found here.


https://lh3.googleusercontent.com/-DtblbLdkmcA/UodRIiLRg7I/AAAAAAAAE_Y/3fdO70Qdk4s/s468/Jet_Banner.jpg

This tutorial will be written in English.

==========

I've made this tutorial in PSP X6, but can be made in other PSP versions as well. I assume you know how to work with the Mirror and Flip script in PSP X6. 


Materials: https://lh3.googleusercontent.com/-fcOXsFCXduE/UpXJmv073EI/AAAAAAAAFKY/YYXn_kSUBdU/s200/4shared_logo_500x480.png

Put the gradient jb-g435 in the Gradients folder.

1) Open a new transparent image of 640 x 480 pixels.
Set the foreground colour to Gradient. Open the menu by clicking on the arrow, indicated by the little yellow hand.



2) Search and select the gradient "jb-g435" and use the following settings:



3) Fill the image with this gradient.
4) Adjust ---> Blur ---> Gaussian Blur, radius 35.
5) Layers ---> Duplicate. Effects ---> Plugins ---> Penta.com - VTR2, with standard settings:


6) Change the opacity of this layer into 70%.
7) Activate the bottom layer. Layers ---> Duplicate. Image ---> Resize 80% bicubic, all layers unchecked.
8) Layers ---> Arrange ---> Move Up.
9) Effects ---> 3D Effects ---> Drop Shadow, colour #827a64.


Repeat the drop shadow, but change the vertical and horizontal offset by -1.
10) Rename this layer baby1.
11) Edit ---> Copy and then Edit ---> Paste ---> Paste as New Image.
12) Effects ---> Plugins ---> Filters Unlimited - Edges Square, square edge 17. Edit ---> Copy. Go back to your work and go to Edit ---> Paste ---> Paste as new layer.
13) Effects ---> Edge Effects ---> Enhance More. Effects ---> 3D Effects> Drop Shadow colour #827a64.


Repeat the drop shadow, but change the vertical and horizontal offset by -1. Rename this layer baby2.
14) Activate the layer baby1. Effects ---> Edge Effects ---> Enhance More.
15) Layers ---> Duplicate. Layers ---> Arrange ---> Move up. Image ---> Resize 80% bicubic, all layers unchecked.
16) Layers ---> Duplicate.
17) Activate the original layer. Effects ---> Plugins ---> Mura's Meister - copies - Afterimage (rotate random)


18) Change the blend mode of this layer to Luminance.
19) Activate the top layer.
20) Adjust ---> Remove Digital Camera Noise.
21) Selections ---> Select All. Selections ---> Float. Select ---> Defloat.
22) Select ---> Modify ---> Contract, 10 pixels.
23) Layers ---> New Raster Layer.
24) Open the tube "rw_sweetinnocense_misted" and go to Edit ---> Copy. Go back to your work and go to Edit ---> Paste ---> Paste into selection. Change the blend mode of this layer to Luminance and lower the opacity to 80%.
25) Layers ---> Merge ---> Merge Down. Remove the selection.
26) Open the tube "Babykant" and go to Edit ---> Copy. Go back to your work and go to Edit ---> Paste ---> Paste as new layer.
27) Move the layer in the layer palette below baby1. Move the lace to the top side of your image. Your image should now look like this:


28) Layers ---> Duplicate. Image ---> Flip. Layers ---> Duplicate.
29) Image ---> Rotate ---> Free Rotate 90 degrees to the left. All layers: unchecked. Rotate single layer: checked.
Move it to the right side of the image. Layers ---> Duplicate. Image ---> mirror. Check that the edges are smooth and well positioned. If necessary, arrange them better.
30) Select the pieces of lace that stick out. Example:


Press on delete. Now repeat this also for the other three lace layers.
31) Activate the top lace layer. Do this three times: Layers ---> Merge ---> Merge Down. Now you have only one lace layer.
32) In the layer palette change the blend mode to Soft Light. Effects ---> Edge Effects ---> Enhance.
33) Layers ---> Merge ---> Merge All.
34) Open the tube "Babyriem" and go to Edit ---> Copy. Go back to your work and go to Edit ---> Paste ---> Paste as new layer.
35) Image ---> Rotate ---> Free Rotate 45 degrees to the left. All layers: unchecked. Rotate single layer: unchecked. Move it to the left corner. Example:


Effects ---> 3D Effects ---> Drop Shadow colour #827a64:


Repeat the drop shadow, but by changing the vertical and horizontal offset by -1.
36) Layers ---> Duplicate. Move it to the lower right corner.
37) Open the tube of the flower "babybloem" and go to Edit ---> Copy. Go back to your work and go to Edit ---> Paste ---> Paste as new layer. Put it on the belt buckle.
38) Effects ---> 3D Effects ---> Drop Shadow with the same settings as before.
39) Layers ---> Duplicate. Move the second flower to the other belt buckle.
40) Open the tube "SilverBabyShoes" and go to Edit ---> Copy. Go back to your work and go to Edit ---> Paste ---> Paste as new layer. Move it to the left bottom corner. Example:


41) Image ---> Resize, 80%, bicubic, all layers unchecked. Press Ctrl + y 5 times.
42) Adjust ---> Hue and Saturation ---> Colorize.


43) Effects  ---> 3D Effects ---> Drop Shadow with the same settings as before.
44) Layers ---> Merge ---> Merge Visible.
45) Close the foreground colour and set the background colour to a light colour taken from the image. I chose #fefdfd. Use the font Bisque, 30 pixels and write your text.
46) Image ---> Rotate ---> rotates 45 degrees to the left. Place your text on the belt.
47) Effects ---> 3D Effects ---> Drop Shadow: same settings as before, but choose as colour black.
48) Adjust ---> Sharpness ---> Sharpen.
49) Layers ---> Duplicate. Move your it a bit to the top of the belt.
Duplicate the layers two more times and place the text on the lower belt.
50) Layers ---> Merge> Merge All.
51) Image ---> Add borders 1 pixel, symmetric, with the colour #706550.
52) Image ---> Add Borders 20 pixels, symmetric, with the colour white.
53) Select the white border with your magic wand, Anti-alias: checked.
Fill with the gradient, used in point 2 (same settings).
54) Effects> 3D Effects ---> Cutout, colour #706565:


Repeat the Cutout, but changing the vertical and horizontal offset to -1. Selections ---> select none.
55) Open the tube "zigzagbaby" and go to Edit ---> Copy. Go back to your work and go to Edit ---> Paste ---> Paste as new layer.
The tube is already in place, there is no need to move it.
56) Open the tube "knop" and go to Edit ---> Copy. Go back to your work and go to Edit ---> Paste ---> Paste as new layer.
Put it in the upper left corner of the zigzag frame.
57) Layers ---> Duplicate. Image ---> mirror. Layers ---> Duplicate. Image ---> flip. Layers ---> Duplicate. Image ---> mirror.
59) Add your name or your watermark. If you like, resize the image, and save in jpg format.
60) Done!

This tutorial was originally written in December 2006.


No comments:

Post a Comment